(scroll down for more photos)

 

Share this UkeTracker page on Facebook:
Scheduled Start Date: Aug 16, 2009
Completed: Sep 14, 2009

This Concert Classic is made from very straight-grained koa, which maximizes the voice and sustain. The streak of sapwood really sets this instrument apart. It weighs just under a pound, with the balance point right at the neck/body joint.

  • Curly Koa top, back & sides

  • Bloodwood body binding

  • Abalone rosette

  • High gloss polyester finish

  • Radiused Ebony fretboard with Bloodwood binding & Abalone markers

  • Mahogany neck

  • Peghed brand geared tuners

  • Leopardwood & Maple Signature Headplate

Hand-crafted in the USA by Gordon & Char Mayer. Each instrument is numbered & signed.

 

Wood Grade: Classic
Wood Availability: This wood species is available. Specific wood sets vary.

 

Gallery Photos (completed instrument)

Back

Front

Full Front
Build Schedule
 

Date

 

  

1

bend sides, glue in neck block

  

2

glue in tail block

  

3

rout & glue-in end graft, kerf top edge, kerf bottom edge, brace back

  

4

brace top, glue back onto sides

  

5

glue top onto sides, prep fretboard & neck

  

6

clean up body, rout dovetail, drill tuner holes, glue fretboard onto neck, rout binding channels, glue in top binding

  

7

shape neck, dress fret ends, glue in back binding

  

8

prep for finish, tape off for spraying

  

9

fill pores twice

  

10

first coat of poly topcoat

  

11

second coat of poly topcoat

  

12

sand & buff finish, glue neck/fretboard onto body

  

13

glue on bridge

  

14

make saddle, (put in pickup, if any), cut nut, final fretwork, put in tuners, put on strings